Advertisement
Install the Rain Collector Tipping Spoon
Assembly
1. Locate the tipping spoon assembly slot on the
underside of the ISS Base.
2. Insert the wider end of the tipping spoon assembly
into the slot first, sliding it under the raised lip of the
slot.
3. Fit the narrow end into the slot and tighten the
thumbscrew securely.
Install the Debris Screen
The Vantage Vue ISS rain collector debris screen captures
debris that may otherwise clog your rain collector.
1. Locate the small black plastic ISS debris screen in your
hardware package.
The debris screen has four small tabs that hold it in place
in the base of the rain collector.
2. Holding the ISS assembly with one hand, and holding the
debris screen by the top, press it into the opening in the
rain collector until the tabs snap into the opening.
Tipping spoon
assembly slot
Tipping spoon
assembly
9
Advertisement
