Table of Contents
Advertisement
Quick Links
Congratulations on your purchase of the future of lighting!
Now that you have a Sixty Scan you should carefully unpack the box and
check the contents to ensure that all pieces are present and in good
condition. If anything looks as if it has been damaged in transit, notify the
shipper immediately and keep the packing material for inspection.
Powering Up
All fixtures must be powered directly from a switched circuit and cannot be
run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch.
All fixtures must be connected to circuits with a working Ground.
SAFETY PRECAUTIONS
• ALWAYS make sure that you are connecting to the proper voltage.
• This product is intended for indoor use only. To prevent risk of fire or
shock, do not expose fixture to rain or moisture.
• Make sure there are no flammable materials close to the unit while
operating.
• ALWAYS disconnect from the power source before replacing fuse and be
sure to replace with same fuse size and type.
• ALWAYS secure fixture using a safety chain. NEVER carry the fixture by its
cord. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 113°F (45°C).
• In the event of a serious operating problem, stop using the unit
immediately. NEVER try to repair the unit by yourself.
• NEVER connect the device to a dimmer pack.
• Avoid direct eye exposure to the light source while it is on.
ATTENTION There are no user serviceable parts in the unit. Do not open
the housing or attempt any repairs yourself. In the event your unit may
require service, please contact SDE Lighting at support@sdelighting.com.
Fuse Replacement
With a flat head screwdriver, wedge the fuse holder out of its housing.
Remove the blown fuse from its holder and replace with exact same type
fuse. Insert the fuse holder back in its place and reconnect power.
SDE Lighting –
www.sdelighting.com
SDE Lighting Sixty Scan
1. GETTING STARTED
What's In The Box?
SDE Lighting Sixty Scan
5ft IEC power cable
User Manual
– Sixty Scan
1
Advertisement
Table of Contents
Summary of Contents for SDE Lighting Sixty Scan
- Page 1 Congratulations on your purchase of the future of lighting! Now that you have a Sixty Scan you should carefully unpack the box and check the contents to ensure that all pieces are present and in good condition. If anything looks as if it has been damaged in transit, notify the shipper immediately and keep the packing material for inspection.
- Page 2 2. The Sixty Scan FEATURES High Performance Mobile DMX Scanner with 1 60W LED Source 7 Colors + White 7 Rotating Gobos + Open 9 DMX Channels 3- Button Menu System with LED Display 3 Operating Modes: DMX, Master/Slave, Sound Active ...
- Page 3 Master. DMX Mode: The Sixty Scan will automatically detect whether DMX 512 data is received. A.001 If the data is received the display will show If there is no data it will...
-
Page 4: Pan Reverse
Green Magenta Rainbow Effect(Slow – Fast) Channel 4 – Gobo Value Gobo Open Gobo 1 “Broken Glass” Gobo 2 “Star” Gobo 3 “Pinwheel” Gobo 4 “Small Circles” Gobo 5 “Sun” Gobo 6 “Target” SDE Lighting – www.sdelighting.com – Sixty Scan... - Page 5 Channel 7 – Dimmer Value 0-255 Dimmer Control (0% - 100%) Channel 8 – Built-in Macro Movement Value Feature No Movement Movement 1 Movement 2 Movement 3 Movement 4 Movement 5 Movement 6 SDE Lighting – www.sdelighting.com – Sixty Scan...
- Page 6 5. APPENDIX Keeping Your Sixty Scan As Good As New The Sixty Scan you’ve received is well tested and road worthy, and as long as you take care of it, it will last. You should always keep the fixture clean, especially if you are using it in an environment with a lot of dust and dirt.
- Page 7 113 degrees F (45 degrees C) Control Protocol DMX-512 DMX Channels Input 3-pin XLR Male Output 3-pin XLR Female Other Operating Standalone, Master/Slave, Sound Active Modes Warranty 1-year limited warranty; does not cover malfunction caused by user damage. SDE Lighting – www.sdelighting.com – Sixty Scan...
Need help?
Do you have a question about the Sixty Scan and is the answer not in the manual?
Questions and answers