Download Print this page

croydon TI6AL Instruction Manual

Advertisement

Quick Links

INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TI6AL-160001-A1
IMPORTANT SAFEGUARDS
When using electrical appliances, basics safety precautions should always be
observed including the following:
-Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
-To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
-Never connect two or more appliances in the same plug.
-When not in use, unplug the blender.
-Avoid starting blender
-Avoid contact with moving parts because blades are sharp. "Handle
carefully".
-Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic
spatula may be used but must be used only when blender is "NOT
RUNNING".
-Only remove the container when blender "COMPLETELY STOPPED".
INSTRUCTIONS FOR USE
-Blender control is made by two bottons: * White button (on/off)
-It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
-To start blender place small quantity of food before connecting it, and afterwards
complete container placing food through service lid.
-For mixed dry ingredient use the pulse button first.
-When blender is running do not remove the lid.
-If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
-Clean container (cup) with liquid soap and water filling to half capacity.
-Turn on blender for some seconds.
-Turn off blender, empty the container and rinse it.
-Unplug blender clean body and external cup with a wet cloth.
-Do not use harsh detergent or chemical products for cleaning.
-To disassemble see Fig1
CROYDONMAQ INDUSTRIAL LTDA.
CROYDON
Estrada São Lourenço, 891 - Capivari - Duque de Caxias.
RJ - Brasil - CEP 25243-150
Phone: 55 21 2776-1928 / 55 21 2676-1512
e-mail: croydon@croydon.com.br
-
* Red button (pulse)
Fax: 55 21 2676-2522
CROYDON
6AL
6AL
6AL
6AL
TI6AL-160001-A1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TI6AL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for croydon TI6AL

  • Page 1 INSTRUCTION MANUAL CROYDON INDUSTRIAL BLENDER - TI6AL-160001-A1 IMPORTANT SAFEGUARDS When using electrical appliances, basics safety precautions should always be observed including the following: -Before connecting your blender check if voltage of your power system corresponds to the same specified on the appliance.
  • Page 2 37.058-3 Chuck Nut PULSE 37.079-3 Shaft 9.410-3 Retainer 110V Washer Washer Screw 9.413-3 Cord Retainer ---------- Screw Ground Technical Data TI6AL Voltage (V) Power (HP) ½ Amperage (A) Speed (rpm) 3465 Capacity (l) Weight (Kg/lbs) 15/33 Dimension WxHxD (cm) 22x62x22...