Clean The Dust Barrel; Pre-Motor Filter; Dual Filter - SAUGKRAFT ePower Prestige-Cyclone Instruction Manual

CLEAN THE DUST BARREL

1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Press knob on low end of dust barrel to open the dust barrel cover.
WARNING: Always unplug the unit from electrical outlet before getting out the dust
barrel.

PRE-MOTOR FILTER

1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Take out the pre-motor filter for cleaning and changing.

DUAL FILTER

1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Apart the dual filter and dust cup by referring the arrow indicator printed on the dust cup.
4. Use a soft brush to clean the dual filter then rinse it with clean water, dry it before replace it.
NOTE: Please take the pre-motor filter out before rinse the dual filter.
14
pre-motor filter