Advertisement
Quick Links
Advertisement
Related Manuals for EVE Light switch
Summary of Contents for EVE Light switch
- Page 1 Quick Start Guide...
- Page 2 Meet Eve Light Switch Power unit Frame Fixing frame Switching unit Switch plate External Input 1 Output N Neutral L Outer conductor / Phase • Voltage: 230 V~ 50 / 60 Hz • Switching capacity: 5 A • Connection terminals: 1.5 mm rigid wire •...
-
Page 3: Get Started
Get Started Installation - Preparation In your fuse box, switch off the fuse connected to your light switch. Switch the light CAUTION - Risk of electric shock! switch on and off a few times to make sure that there is no current flowing. - Page 4 Installation - Rooms with a single light switch Remove your current light switch Loosen your existing light switch and pull it out. Note the current wiring and take a photo of it if necessary. You can usually tell which line is the current-carrying input (L) and which line leads to the light by the direction from which the cables are led into the box and by the inscription on your old light switch.
- Page 5 Connect Eve Light Switch • 1: Output (light) • N: Neutral line Eve Light Switch requires that a neutral line is connected. As an option, the second connection can be used to loop through the neutral line for a connected light, replacing a corresponding terminal.
- Page 6 Installation - using substations Use Eve Light Switch in rooms with several light switches at the end of the chain right before the light. Consult a specialist if you are unsure which lines are in use. Remove your current light switch Loosen your existing light switch and pull it out.
- Page 7 Since Eve Light Switch reacts to every change in the current at the external input, you only need one of the incoming lines of an existing alternating or cross-connection, as...
- Page 8 • : External input (additional light switch) • N: Neutral line Eve Light Switch requires that a neutral line is connected. As an option, the second connection can be used to loop through the neutral line for a connected light, replacing a corresponding terminal. If the outlet is not equipped with a neutral line, Eve Light Switch is incompatible with this outlet.
-
Page 9: Installation
Insert the switching unit and then press the switch plate onto it. In your fuse box, switch on the fuse dedicated to the circuit of that light switch. You should now be able to switch your light on and off by pressing Eve Light Switch. - Page 10 Switch on your light using the You can also switch on your light • Open the Eve app and tap Add Accessories. Eve will now guide you through the app or a Siri voice command. directly via the Eve Light Switch.
- Page 11 Reset Remove the switch plate by pulling the center plate evenly from both sides. Press both left buttons simultaneously for 10 seconds.
- Page 12 Disassembly In your fuse box, switch off the fuse connected to your light switch. Make sure that there is no current flowing by switching Eve Light Switch on and off a few times. Remove the switch plate by pulling the center plate evenly from both sides.
-
Page 13: Video Tutorial
Video tutorial Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy. This device conforms to the general requirements and further relevant provisions of the 2014/53/EC directive. You can download the declaration of conformity from www.evehome.com/doc.
Need help?
Do you have a question about the Light switch and is the answer not in the manual?
Questions and answers