Philips Magnavox TS3258C Quick Use And Installation Manual

Color Television and Remote Control
A
NTENNA
BEGIN
round cable connector (75
O /I
UTDOOR NDOOR
ohm) on the end, then you're
A
combination (outdoor
ready to connect it to the TV.
or indoor) antenna
If your antenna has flat twin-
receives normal broadcast
lead wire (300 ohm), you first
channels 2-13 (VHF) and
need to attach the antenna wires
14-69 (UHF). Your con- to the screws on a 300 to 75
ohm adapter.
nection to such an antenna
is easy since there is only
one antenna plug (75Ω-
ohm) on the back of your
Combination VHF/UHF Antenna
TV - and that's where the
(Outdoor or Indoor)
antenna goes.
C TV
BEGIN
ABLE
nal is a single round cable (75
C I /C
ABLE NPUT ONVERTER
ohm) then you're ready to con-
Y
our Cable TV input
nect to the TV.
into your home may be If you have a Cable TV
Converter Box:
a single (75 ohm) cable, or
Connect the Cable TV signal to
a Converter Box installa-
the Cable Signal IN(put) plug
tion. In either case the
on the Converter.
connection to the TV is
very easy. Just put the
threaded end of the cable
signal to the TV's antenna
plug and screw it down
tight.
Cable TV Converter
Box Connection
VCR TV
TO
BEGIN
Antenna or Cable TV signal
B C
ASIC ONNECTION
to the IN FROM ANT(enna)
T he basic Antenna, or
plug on the VCR.
Cable TV, to VCR to
TV connection is shown to
the right. For more infor-
mation on other hookups
(possible when Cable
Converter/Descrambler
boxes are included) refer
to your accessory VCR
and Cable Converter
Owner's Manual for
details.
Q
UICK
Getting Started
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
How to Use the "INSTALL" Controls ..................2-3
Using the Language Control......................................2
Setting the TV to Auto Program Channels ................2
Setting the TV for a Cable or Antenna Signal...........2
Using the Adding and Deleting Channels .................3
Setting the Channel Name Control............................3
How to use the Smart Clock control .........................3
Basic TV and Remote Control Operation .................4
Push the round end of the
If your antenna has a
adapter (or antenna) onto the
ANTENNA (ANT "A") plug on
the rear of the TV. If the round
end of the antenna wire is
threaded, screw it down tight.
300 to 75Ω
Adapter
1
(483521827003)
Twin Lead
Wire
Round Cable
75Ω Ohm
If your Cable TV sig-
Connect the Cable TV
cable to the ANTENNA (ANT
"A") plug on the TV.
If you have a Cable TV
Converter Box:
Connect the OUT(put) plug
from the Converter to the
ANTENNA (ANT "A") plug on
the TV (connecting cable sup-
plied with the Converter.)
Cable TV Signal
Cable TV
Company
OR
Round Cable
75Ω Ohm
Connect the OUT TO TV
Connect your
plug on the VCR to the
ANTENNA (ANT "A") plug
on the TV (connecting cable
supplied with the VCR.)
300 to 75Ω Ohm
Adapter
Outdoor VHF/UHF
Antenna
OR
IN FROM ANT.
Cable TV signal
U I
SE AND NSTALLATION
T C
ABLE OF ONTENTS
• For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
maynot apply to your TV.
Note: For homes with separate UHF and VHF anten-
nas you will need an optional combiner to connect to
the TV.
U/V Combiner
OR
75-300 Ohm Adapter
2
ANT "A"
75
OR
2
ANT "A"
75
Back of TV
1
Refer to the Owner's
Manual included with your
VCR for other possible con-
nections and TV/VCR operat-
ing details.
Round Cable
OUT TO TV 75Ω Supplied
with VCR
ANT "A"
75
VCR
G
UIDE
S
MART
H
ELP
Remember,
be sure to set the
TV for the type sig-
nal you've connect-
30
0Ω
ed (see "INSTALL"
S-VIDEO VIDEO
L
75 ANT "A" AUDIO R/MONO
IN-2 IN-1 OUT
on page 2 of this
Back of TV
Guide.)
To order any
optional accessory
contact your dealer
or call the toll-free
accessory ordering
number:
1-800-851-8885
S-VIDEO
VIDEO
L
ANT "A" AUDIO
75 R/MONO
IN-2 IN-1 OUT
Back of TV
S
MART
H
ELP
Remember,
set the TV for the
type signal you've
just connected (see
"INSTALL" page 2
of this Set-Up
Guide.)
Your TV can set
itself to select only
the channel numbers
S-VIDEO
VIDEO on your Cable sys-
L
ANT "A" AUDIO
75 R/MONO
IN-2 IN-1 OUT
tem (see "AUTO
PROGRAM" page
2). If you use a
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
S-VIDEO
VIDEO
L
75 ANT "A" AUDIO
R/MONO
IN-2 IN-1 OUT
Back of TV