Do not brake suddenly while using this trainer. This results in unnecessary wear and tear to the rear tyre. • Do not attempt to move the product when it is connected to the bike. • If the product is damaged or has any defects, please contact cservice@oypla.com USER MANUAL Model No: 3076...
Assembly Instructions Parts List: If you are missing any of the below parts please contact cservice@oypla.com Please be aware that you will be referring to this parts list throughout the assembly process. Bike Trainer Tyre Pressure Screw 1pcs 1pcs Directions for Use: Firstly, put the tyre pressure screw into the holes that are located on the bike trainer as shown below.
Page 4
Expand the bike trainer so that it is in a stable position. Use the tyre pressure screw to adjust the magnetic resistor by turning it anti-clockwise as shown below. Put the rear axle of the bike on the left side of the bike trainer. Then also do the same on the right side of the bike trainer as shown below.
Page 5
Your bike trainer is now ready to use! Please retain a copy of all instructions for future consultation. Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX USER MANUAL Model No: 3076...
Need help?
Do you have a question about the LEISURE 3076 and is the answer not in the manual?
Questions and answers