Download Print this page

Brodit 721141 Installation Instructions

Active holder with cig-plug

Advertisement

Quick Links

3 September, 2019, www.brodit.com, © 2019 Brodit AB
Product 721141
721141 Active holder with cig-plug With USB-cable with cig-plug adapter. With tilt swivel. 2,1A charging.
12/24V.
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet
and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect
either to the vehicle's USB outlet or the 12/24V socket. You have full access to the camera and all buttons when
the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and
to take it out of the holder when leaving the car.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between
portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of
high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting
platform.
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported
by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the
USB/charging cable that comes with your device. Charging through USB works regardless.
EAN: 7320287211412
Item no 721141 fits:
Samsung Galaxy A40 (SM-A405) (For all countries)

Advertisement

loading

Summary of Contents for Brodit 721141

  • Page 1 3 September, 2019, www.brodit.com, © 2019 Brodit AB Product 721141 721141 Active holder with cig-plug With USB-cable with cig-plug adapter. With tilt swivel. 2,1A charging. 12/24V. Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient.
  • Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

This manual is also suitable for:

511944