AmazonBasics B072DWYBL7 Manual page 8

• Fill the product up to the 1.0 L mark with a half water, half white vinegar solution and let it sit for
over 1 hour.
• Pour the solution out of the product. Wipe off the residues (if any) with a damp cloth.
• Fill the product with clean water, bring to boil and then discard the water.
• To clean the kettle thoroughly, it may be necessary to repeat the cleaning process above several times.
• Wipe the outside surface with a damp cloth and then wipe dry with a soft cloth.
Removing and Cleaning the Filter
• Push the filter down near point
• Now push the filter down near point
• Carefully pull out the hook (point
• Wash it with clean water and dry thoroughly before replacing it in the kettle.
• To reinstall the filter, follow the steps above in the reverse order.
8
C
B
A
C
B
A
(or point ) to dislodge the hook.
B C
(or point ) to dislodge the other hook.
C
B
) and remove the filter.
A