Page 1
Setting switch M56K144 with Hirschmann STAK3 (D) M56F150 with Hirschmann STAK3 (CH) M56F151 with service terminals (D) Adjusting instructions Declaration of conformity This product complies with the essential requirements of the directive 2004/108/EG. It is authorised for use in all EC member states and in Switzerland without any need of prior registration.
Page 2
SoftLock (GU45..E07). Connection of the setting switch To realise the required setting procedures, the setting switch M56K144/M56F150/M56F151 must be used. If necessary do use the adaptation cable with the service terminals M56B265. The work with the service terminals may be accomplished only by an electrical specialist.