Hotron HR80-HW Setup Instructions

HR80-HW
Thank you for purchasing the dual purpose HR80-HW Wired Digital Door Key / Digital Touch Pad.
COMPOSITION & SPECIFICATIONS
Wired Digital Door Key main body
Mounting screws (4x16)
Mounting template
Connection wire
User's Manual
Power supply
Relay contact capacity
Operating temp
Type
Power consumption
Card type / Frequency
International Protection

GENERAL INFORMATION

Screw bolt for
disassembling
/assembling

DIMENSION

HR80-HW DECLARATION OF CONFORMITY

We manufacturer, hereby declare that the product satisfies all the technical regulations applicable to the product within
the scope of Council Directives 2006/95/EC, 2004/108/EC and 99/5/EC:
Description of Product:
Model: HR80-HW / Type:Digital Door Lock with card key for access control
Technology used is Capacitive Touch Switch and RFID
All essential radio test suites have been carried out.
Testing laboratory :
EMC Compliance Limited
Hotron Ltd. 26 Dublin Street, Carlow, Ireland.
HR80-HW Setup Instructions
1
2
1
1
1 copy
DC 12~30V, AC 12~24V
24V/1A
-20℃~50℃
Password / Card
300mA Under
ISO14443A(Mifare) / 13.56MHz
IP54 (water proof)
Upper case
Mounting screws
Lower case
Water proof pad (Silicone rubber)
(When assembling the product,
the water proof pad should not be twisted)
Connection
wire hole
Tel: +353 (0)59 914 0345
Disassembling the upper case
Unfasten the screw bolt,
and use a flat blade (⊖)screwdriver
to disassemble it,
as shown in the figure below.
Water proof pad (Silicone rubber)
Between outside gaps
150
Directives Fulfilled:
Radio : EN 302 291-1 V1.1.1 /-2 V1.1.1
EMC: EN 301 489-1 V1.9.2 /-3 V1.4.1
Safety: EN 60950-1: 2006+A11:2009+A1:2010+A12:2011
Date : Apr. 29, 2014
Authorized representative or manufacturer :
Hotron., LTD.
26 Dublin Street, Carlow, Ireland.
Tel. +353 (0)59 914 0345 / Fax. +353 (0)59 914 0543
Fax: +353 (0)59 914 0543 Email: info@hotron.com
HOTRON LTD.
unit : m/m
Web: www.hotron.com