Microtek Take-it S1 User Manual page 70

Appendix . – Warning and Error Messages
The following table describes the LCD warning and error messages that are produced by the camera. .ollow the
solution to eliminate the problem indicated by the message.
Display
(Blinking)
BATTERY LOW!
CARD ERROR!
MEMORY .ULL!
IMAGE CANNOT BE DELETED!
All manuals and user guides at all-guides.com
Problem
Batteries are exhausted.
Battery power is depleted;
camera will shut off soon.
• The SD card contact area
is smudged.
• The SD card is damaged.
• Incorrectly formatted SD card.
• Camera is faulty.
The memory space is fully recorded. Erase some data or use an SD card that
The SD card is write-protected.
Solution
Turn the camera off and replace or
recharge batteries.
Replace or recharge batteries.
• Use a cotton swab dipped in with
industrial alcohol to clean the contacts.
• Replace the SD card.
• Reformat or replace the SD card.
• Contact Microtek Customer Service.
has ample free space.
Set the write-protected tab on the SD card
to the "unlocked" position.
$!