Advertisement
James Martin Digital Scales
TARE FUNCTION
You can do consecutive weighing without removing the
weighing mass already placed on the platform. Each time
before adding an additional ingredient, simply press the
Zero button (C) once, it will then conduct a tare function
and return the LCD to zero, then add a new ingredient and
the LCD will weigh and indicate only the net weight of the
added ingredient.
While the tare function is activated the LCD will show
an icon T in the top left corner. On Tare mode when you
press the Zero button the total weight will be shown, press
the zero button again to return the LCD to zero and carry
on weighing.
Please note:
The Tare function will activate only when the initial weight exceeds 200g.
When you have completed weighing, simply press and hold the on/off button
(C) to turn off the unit, if the unit is left idle it will automatically shut down after
2 minutes.
CLEANING AND MAINTENANCE
1. The unit is a high precision device and is extremely sensitive. Avoid
dropping the unit or dropping heavy objects on to the unit.
2. Use a slightly damp cloth to clean the appliance a mild detergent can be
used if necessary, do not use strong chemicals, alcohol or benzene for
cleaning.
3. Keep unit away from high temperatures.
4. Keep unit away from high electronic magnetic fields such as cordless
phone, computer transformer etc, as this will interfere with the function
and accuracy.
5. Always use the scale on a hard flat surface.
6. If the unit fails to work check the batteries are installed correctly and have
sufficient power.
8
Advertisement
