Status Indicators - Sonos CONNECT:AMP Product Manual

12
• Using the Sonos app on a PC, go to Settings -> Advanced from the Manage menu. On the General
tab, select Wireless Setup.
• Using the Sonos app on a Mac, go to Preferences -> Advanced from the Sonos menu. On the General
tab, select Wireless Setup.
Enter the new wireless network password when prompted.
3.
Once the password is accepted, you can unplug the player from your router and move it back to its
4.
original location.

Status indicators

Indicator Lights
Flashing white Powering up
Solid white Powered up and associated
(dimly lit) with a Sonos system (normal
operation)
Solid white Touch control(s) active
(brightly lit)
Flashing green Powered up, not yet
associated with a Sonos
system
Or,
WAC (wireless access
configuration) join ready
Slowly flashing Surround audio is off or
green SUB audio is off
Solid green Volume set to zero or muted
Status Sonos Product
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR,
PLAYBASE
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR,
PLAYBASE
PLAY:5 (gen2),
PLAYBASE
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR,
PLAYBASE
PLAY:1, PLAY:3,
PLAY:5 (gen2),
SUB
CONNECT,
CONNECT:AMP,
PLAY:1, PLAY:3,
PLAY:5,
PLAYBAR,
PLAYBASE
Additional Information
You can turn the white status indicator
light on or off from More -> Settings ->
Room Settings. (Sonos products that are
paired together share the same setting.)
Brightens when touch controls are
activated.
For a SUB, this may indicate the SUB is
not yet paired with a speaker.
Applicable for speaker configured as a
surround speaker, or for a SUB paired
with a PLAYBAR.
Product Guide