PROTECTION MODE:
Shortcircuit/Overpower Protection: If the AC output had a short
circuite or overpowered (Load(s) power>100W), the unit will shutdown
AC output to protect itself, "AC"letter on the LED screen will switch to
"DC". please clear the problem and re-press the AC button for AC
output.
*Some devices, such as a laser printer may require a peak power to
start or work during a very time period, the peak power could exceed
100W or even higher, this could cause overpower protection with this
unit. Please remove the devices and consult with the device
manufacturers for more information.please clear the problem and
re-press the AC button for AC output.
How to use the emergency light?
4.
This product has emergency light, press
then you can turn on the emergency light, press
brightness (Support 2 level brightness)
How to recharge the product?
5.
Connect the AC plug of standard charging adapter for this product to
the household AC socket, connect the DC plug of standard charging
adapter with the DC input interface
product can be charged. At this time, the battery icon
the light will run. When the product is full of power, the battery icon
will fully light. After the power station is fully charged, please remove
the charger in time.
【
】
the on the control panel,
of this product, then this
AC Socket
▼
▲
Charging time about 8 hrs
With a AC Adapter (15V/2A)
6
the to switch the
will light up,
www.PyleUSA.com