Download Print this page

Anvil TSK0004 R02 Installation Operation And Care page 4

4 & 6 slice toaster electric

Advertisement

UNPACKING
Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or
postal authority, and a request for a damage report should be made.
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED DAMAGE.
THE FORM FOR FILING SUCH A CLAIM WILL BE PROVIDED
BY THE CARRIER.
GENERAL INSTALLATION AND OPERATION INSTRUCTIONS:
1.
Install the toaster in the most convenient location for ease of
cleaning, maintenance and general operation. If this appliance is
to be positioned in close proximity to a wall, partitions, kitchen
furniture, decorative finishes, etc. it is recommended that they
be made of non-combustible heat insulating material, and the
closest attention be paid to fire prevention regulations.
2.
Place the bread into the respective slots in the toaster carriage
and lift the bakelite knob.
3.
For optimized usage, the Anvil 4 and 6 slice toasters have the
option of variable slice settings. This enables the units to be set
for two, four or on the TSK 0006 six slices, depending on
requirements (See diagram A) .The number of slices to be
toasted for each appliance respectively can be selected by
positioning the rocker switch to the required setting (See
diagram B).
4.
Set the timer to the desired toasting time required. The
respective elements will immediately switch on as well as the
"TIMER" pilot light. An audible "TING" will also sound at the end
of the time cycle.
5.
When the time has elapsed, the respective toaster elements, as
well as the "TIMER" pilot light will switch off.
page 1
page 14

Advertisement

loading

This manual is also suitable for:

Tsk0006 r02