Inserting A Sim - Vortex SKYBELL User Manual

-​ C ONNECT THE SKYBELL HOME
-​ C ONNECTING YOUR SERVICE
To use the networks services available in your SkyBell, you will need to sign up with a wireless
provider and purchase a SIM (Subscriber Identity Module) Card or purchase a prepaid SIM card.
In many cases, the wireless provider will make available descriptions of its services and
instructions for using its features. Wireless providers may differ in their support of features. Before
you sign up, make sure the wireless provider supports the features that you need.
-​ I NSTALLING THE
1. Choosing a proper place for the SkyBell and antenna is the important first step for installation.
You can use your mobile phone to search for the place where the strongest signal is. Then put
the SkyBell here.
2. Screw the antenna into the port in the back of the SkyBell.
3. Please do not place the antenna and the SkyBell too close to a TV set, computer, or radiogram. It
will disturb the signal of the SkyBell.
-​ I NSERTING A SIM
Make sure the SkyBell is switched off and the AC adapter is unplugged: insert the SIM card only
when the SkyBell is switched off and the AC adapter is unplugged. Follow the instructions below
to insert a SIM Card into the SkyBell.
1. Screw off the screw of SIM card case, and open the cover.
2. Slide back the SIM card door and lift it up.
3. Slide the SIM card into the SIM door making sure that the clipped corner of the SIM card
lines up with the clipped corner of the SIM holder.
4. Close the SIM card door and slide it to lock the SIM card in place.
5. Replace the cover of SIM card case and fixes it with a screw.
PROVIDER​ -
ANTENNA​ -
CARD​ -
PHONE​ -