Page 1
Access and Control Extension Module User’s Manual Version 1.0.0...
Page 2
Welcome Thank you for purchasing our product! This user’s manual is designed to be a reference tool for your system. Please keep this user’s manual well for future reference! Please read the following safeguard and warnings carefully before you use this series product! Important Safeguards and Warnings All installation and operation here should conform to your local electrical safety codes.
Page 4
1. General Introduction 1.1 Overview The access and control extension module is a door extension module controller for 86mm×86mm power box. The extension module can work independently with the access control, video door phone and management platform. It can easily realize A&C extension function. The module communicates with the upper-level device via RS485 BUS to realize A&C function and support swipe card function with the card reader.
Page 5
2. Installation Please refer to the following figure for installation information. See Figure 2. Figure 2 Please refer to the following sheet for detailed information Name Function +12V Power Power GND 485A Host 485A 485B Host 485B POWER Power indicator light Running indicator light UNLOCK Unlock indicator light...
Page 6
3. FAQ I swipe the card but can not open the door. Please contact the management center, make sure the card has the corresponding right, or it is still in the valid period or it can not be used in currenr period. The magcard is damaged.
4. Specifications Model Module A&C Lock NO Support Lock NC Support Lock/Unlock Support Button Door Status Support Detection Operation Mode Swipe card to input(work with the card reader)and lock/unlock Input button IC Card Supported Card Max 5000 cards Amount Add/Delete Card Support Realtime Clock Clock Time Support...
Page 8
• Please visit our website or contact your local service engineer for more information.
Need help?
Do you have a question about the DEE1010B and is the answer not in the manual?
Questions and answers