Operating Instructions - Leister COUPON CUTTER 500 Operating Instructions Manual

Operating instructions

Congratulations on your purchase of the COUPON CUTTER 500.
You have chosen a first-class weld test punch.
The COUPON CUTTER 500 was developed and produced in accordance with the latest technology in the plastics-
processing industry.
Read through the operating instructions carefully before using the device for the
first time. Always keep the operating instructions with the COUPON CUTTER 500.
Do not pass the COUPON CUTTER 500 on to anyone else without the operating
instructions.
COUPON CUTTER 500
Weld test punch
1. Important safety instructions
In addition to the safety instructions contained in the individual chapters of these operating instructions,
the following provisions must also be followed.
Caution
1.1 Intended use
The COUPON CUTTER 500 is intended for punching plastic test material for peel, shear, and tensile tests
carried out on sealing sheets, geotextiles, and films. No other objects or materials may be punched with the
COUPON CUTTER 500. Only punch clean and dry test material.
1.2 Improper use
Any other use of the COUPON CUTTER 500 or any use beyond the type of use described is deemed improper use.
(translation of operating instructions)
Place the device on a safe and stable work surface.
Children are not permitted to operate the device.
Always wear protective gloves.
Danger of injury. When touching the punching blade.
Never place your fingers and/or other parts of the body in the opening between
the cutting blade and the cutting plate.
Never place your fingers in the area around the lever mechanism.
EN
7