HiFiMAN Jade II User Manual page 15

Basic Connection
Initial Use
When the "POWER" switch on the front panel is pushed on, the red LED on the front
panel blinks for 30 seconds. When the LED lights up continuously, the unit is ready to
operate.
Plug the headphone into one of the sockets on the front panel.
Select the connected input signal using the "INPUT" selector switch beside the input
connector.
Turn the volume potentiometer clockwise to set optimal volume level. Output sound
level can be read from indicators around the knob.
Balanced Input and AUX Input
Press the switch to select the Balanced Input source.
Press the switch again (the switch will reset) to select the RCA Input source.
BAL and RCA
Selection Switch
Balanced Input
RCA Input
RCA IN BALANCED IN
14