Lawn-King LK BV 30 AUTO Translation Of The Original Instructions For Manual

Petrol blower vac

Advertisement

LK BV 30 AUTO
(Mod. PLB30A)
Petrol Blower Vac
Translation of the original instructions for manual
WARNING: Read the instructions manual before using the product and keep for
future reference.
Before initial start-up, please read through these operating instructions
carefully. Keep the instructions safe and pass them on to any subsequent user
so that the information is always available.
Serial Number:

Advertisement

Table of Contents
loading

Summary of Contents for Lawn-King LK BV 30 AUTO

  • Page 1 LK BV 30 AUTO (Mod. PLB30A) Petrol Blower Vac Translation of the original instructions for manual WARNING: Read the instructions manual before using the product and keep for future reference. Before initial start-up, please read through these operating instructions carefully. Keep the instructions safe and pass them on to any subsequent user so that the information is always available.
  • Page 3: Table Of Contents

    CONTENTS Contents Intended use Safety information Symbols General description Assembly Operation Cleaning and maintenance Troubleshooting Storage Disposal / environmental protection Guarantee Technical specifications...
  • Page 4: Intended Use

    INTENDED USE The leaf blower vac is not intended for wet conditions! Avoid wet materials such as leaves and dirt, twigs, branches, pine needles, grass, earth, sand, mulch, cuttings, etc. Do not use on wet lawns, grass areas or fields. Misuse may lead to congestion in the shredding unit and lead to reduced functionality.
  • Page 5: Safety Information

    SAFETY INFORMATION GENERAL SAFETY RULES Warning! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in fire and/or serious personal injury. Save These Instructions 1. Do not allow children or infirm persons or untrained people to use this unit. 2.
  • Page 6 OPERATING RANGE This Blower/Vacuum device must only be used to blow away or vacuum dry and light materials as e.g. dry leaves, small branches, and pieces of paper. The vacuuming of heavy materials as e.g. metal, stones, big branches and broken glass is expressively excluded.
  • Page 7 16.After use, and with the tool switched off, check for any damage. If you have any doubts, contact an authorized service center. Do not try to repair the tool or access internal parts yourself. 17.Only use the tool according to the instructions given in this manual. 18.Check regularly that the screws and fixings are tight.
  • Page 8: Symbols

    SYMBOLS Symbols on the Equipment Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL DESIGNATION/EXPLANATION Precautions that involve your safety.
  • Page 9 Exhaust gas contains carbon monoxide, an odorless and deadly poison. Do not start / use engine in an enclosed area. Pull off the plug spark before any maintenance. Symbol on the fuel pump: Press the fuel pump 10x before starting Specification of the guaranteed sound power level LWA in dB.
  • Page 10 The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, DANGER: will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, WARNING: could result in death or serious injury.
  • Page 11: General Description

    GENERAL DESCRIPTION 1. Vacuum Nozzle 14. Air Guide Tube 2. Lower Blower Tube 15.Front handle 3. Upper Blower Tube 16.Rear handle 4. On/Off Switch 17. Accelerograph button 5. Hook For Harness 18. Muffler 6. Throttle Trigger 19. Blower Tube 2+3 connection chain 7.
  • Page 12: Assembly

    ASSEMBLY Employ only original parts. Danger of injury. UNPACKING: Unpack the device and check whether it is complete: 1 Flat nozzle 2+3 Two-part blower/vacuum tube 5 Carrying strap 13Collection bag with bag holder nozzle 20Leaf blower engine part Before putting the device into operation, the blower / suction tube must be completely mounted and screwed tight and the collection bag and carrying strap must be attached.
  • Page 13 FUELING: 1. Always use extreme care when handling fuel. Fuel is highly flammable. 2. Never attempt to fuel the blower/vac if the fuel system components are damaged or leaking. 3. Never attempt to refuel the engine while it is running or still warm. Allow it to cool first. 4.
  • Page 14: Operation

    OPERATION Initial Operation Before switching on the device, make sure it is not in contact with any objects. Ensure stable positioning. 1. Put on the carrying strap (5) and adjust it to the optimum length. 2. Open the quick-release fastener and move the additional grip to the desired position. Reclose the quick-release fastener.
  • Page 15 Working with the leaf blower The leaf blower may only be used for the following purposes: - As a blower to pile up dry leaf material or to blow material out places that are hard to access (e.g. under cars) - As a suction device to suck u.p dry material.
  • Page 16: Cleaning And Maintenance

    If the device stops suddenly during operation and does not produce any suction, then it is to be switched off immediately. Make sure that no material is wedged in between the shredder impeller and the casing. Carry out the work as described in the chapter “Cleaning and Maintenance”.
  • Page 17 Cleaning the air outlet area 1. Remove the collection bag. 2. Clean the external air outlet area on the device. 3. Set the operating mode selector switch to the suction symbol. 4. Remove dirt residues in the inner air outlet area with a bottle brush or similar. 5.
  • Page 18 Air Filter service Keep the air filter clean. Clean the air cleaner element every 20 hours. 1. Switch off the engine. 2. Remove the air cleaner cap from the air cleaner by removing the air cleaner cap screw. 3. Remove the element from the air cleaner case. 4.
  • Page 19: Troubleshooting

    TROUBLESHOOTING Carbon Removal of engine internal parts Every 50 hours of operation These items must be performed with proper tools. See your authorized Lawn-King dealer for service. Problem Possible Cause Solution • Check the power switch is ON and Mains voltage is not present Device does not start that there is fuel in the tank.
  • Page 20: Storage

    STORAGE General Storage Instructions • Clean the equipment and accessories carefully before storage. • Keep the equipment in a dry and dustproof place, and above all out of reach of children. • Do not wrap the equipment in plastic bags, as damp and mould may form. •...
  • Page 21: Disposal / Environmental Protection

    DISPOSAL / ENVIRONMENTAL PROTECTION Machinery does not belong in domestic waste. Do not allow used oil and petrol residues into the sewer system or drains. Dispose of used oil and petrol residues in an environmentally friendly way – take them to a disposal point.
  • Page 22: Technical Specifications

    TECHNICAL SPECIFICATIONS PRODUCT SPECIFICATIONS Engine……………………………air-cooled, 2 stoke piston valve, gasoline engine Engine displacement..................30 cc Air velocity....................max.265km/h Air volume.....................max.9.5m /min Sound power level ..................103 dB(A) Sound pressure level at operator position ...........94 dB(A) Sound power level Guaranteed..............106 dB(A) Uncertainty K of Sound power..............3 dB(A) Maximum engine performance..............0.85 kW Maximum rotational frequency of the engine..........7500r /min Engine speed at idling.................3000r /min...
  • Page 23 UTTOXETER STAFFORDSHIRE ST14 8HU The undersigner, T.J. SKELDON, Managing Director, Declare that Petrol Blower Vac: LAWNKING model LK BV 30 AUTO (Factory models: PLB30A - References: ASBT911273) Complies with the essential health and safety requirements of the following directives: - The Machinery Directive 2006/42/EC - The EMC Directive 2004/108/EC - The Noise Directive 2000/14/EC &...

Table of Contents