Orbit 67795 Instructions

8
dimensions:
proof no:
flat: w: 11" h: 17"
date: finished: w 11" d: " h 17"
11.22.10
colors
des: MZ
client: Orbit
Registration
sku:
67795
K
p 801 295 9820
upc: N/A
f 801 951 5815
additional instructions:
· LB 600686
www.fluid-studio.net file name: 67795-24 rA.indd
·
1065 South 500 West
·
software: InDesign CS5
Bountiful, Utah 84010
2-IN-1 DrIp FIlter/
pressure regulator
Instructions

Important Guidelines

For outdoor use with cold water only.
Check local codes for installation requirements.
If static water pressure exceeds 80 PSI, a pressure regulator should be
installed on the main sprinkler line.
Pressure test all water lines before covering pipe and timer control wire.
Warning: DO NOT use pipe dope on threads, use thread seal tape.
Orbit ® Irrigation Products, Inc.
North Salt Lake, UT 84054
1-800-488-6156
www.orbitonline.com
Printers are responsible for
meeting print production
requirements. Any changes
must be approved by the
client and Fluid Studio.
printed piece must meet
fold lie color
designated specifications
non printing non printing
on this form.
PMS PMS
PMS
???? ???? ???? © 2010 Fluid Studio. This
work is the property of Fluid
Studio, and cannot be used,
reproduced or distributed
in any way without their
express permission.
Congratulations on your purchase of the Orbit ® 2-in-1 Filter
Pressure Regulator. This revolutionary product allows you
to convert your 3/4" female threaded inline or Anti-Siphon
irrigation valve into a low pressure drip valve.
Features:
200 Mesh (removable) filter
30 PSI pressure regulator
Flush Port for easy cleaning
¾" NPT Inlet x 1" NPT Outlet
½" Drip tubing adapter (fits .690 to .710 OD Drip Tubing)
Model 67795
67795-24 rA