Advertisement
.
Getting Started Guide
1.
UNPACK
Unpack your Bauhn Cordless Headphones from the packaging and check you have all of the components:
•
1 x Base Unit
•
1 x Cordless Headphones
•
1 x 3.5mm Audio Cable
•
1 x RCA Cable
2.
POWER THE BASE UNIT
Insert the power adaptor plug to the rear of the base unit. Plug in the power
adaptor into a power point and turn ON. The LED on the front of the base
unit will turn red when connected to power and a channel has been selected.
Place the headphones on to the base unit. The charge indicator will turn
yellow. Charge for 3 hours before first use.
3.
TURN ON CORDLESS HEADPHONES
When the base unit is powered, switch ON the headphones by pressing
the power button on the right ear cup. The blue light will flash intermittently
to indicate that the headphones are ON.
Model - HE215029
PLU - 49431
12/2018
Version 1.0
After Sales Support
1300 663 907
www.winplus.com.au
•
1 x Power Adaptor
•
1 x Instruction Manual
•
1 x Getting Started Guide
•
1 x Warranty Card
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bauhn HE215029
Summary of Contents for Bauhn HE215029
- Page 1 Getting Started Guide UNPACK Unpack your Bauhn Cordless Headphones from the packaging and check you have all of the components: • 1 x Base Unit • 1 x Power Adaptor • 1 x Cordless Headphones • 1 x Instruction Manual •...
- Page 2 Press the “S” button on the side of the right ear cup to scan for the channel you selected. You may need to press scan a few times to tune to the correct channel. Congratulations, your Bauhn Cordless Headphones are ready to use. After Sales Support 1300 663 907...
Need help?
Do you have a question about the HE215029 and is the answer not in the manual?
Questions and answers