Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. 1.2 Safety instructions The device can be used by children 8 years and up, as well as by people with disabilities and those with limited experience/ knowledge as long as they are under supervision or have been instructed on proper use of the device and its possible dangers.
Page 5
Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. Do not use any accessory or spare parts that have not been recommended by the manufacturer.
Page 6
Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. ...
1.3 Proper use CAUTION! The device has been designed and manufactured for the industrial use and should be operated only by the qualified personnel of the restaurants, canteens and similar places. The operational safety of the device is assured only in case of proper use, according to the operation manual.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Overview of parts View from the operational side Front glass pane LED lighting Left glass pane Folding glass door, service side Right glass pane ON/OFF switch 10 Digital display Removable shelf (8) 11 Ventilation grid Castors (4), 2 with brakes Shelfs with pricing rails - 27 -...
5. Installation and operation 5.1 Installation Positioning Before the operation unpack the device and remove all package material and protective foil from the device and equipment. CAUTION! Never remove the rating plate and any warning signs from the device. ...
Connection DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! Connect the device only to properly installed single socket with protective terminal.
Page 14
Digital temperature control The temperature control is located at the service side of the unit. Temperature decrease button Temperature increase button LCD cooling indicator LCD defrost indicator Manual defrost button Adjust/save setting (SET) button Digital display LCD Indicators LCD cooling indicator: The light on indicates cooling, it is off when the temperature inside the cabinet remains constant, and flashes for delayed start.
Page 15
Setting the desired temperature (desired value) To set or change the desired value: briefly press the button , the value on the digital display will start flashing; increase or reduce the temperature value as needed using the buttons ...
Cooling of food products Prepare relevant food products to be cooled in the display fridge. Only packaged salads, snacks, sandwiches, yoghurts, etc. can be stored in the cooling display. When the inside of the device reaches the set temperature, the LED cooling indicator will go off and the unit is ready to hold relevant food products ...
Page 17
o Never use chemical or corrosive cleaning agents such as e.g. scouring powder, alcohol, solvents or other substances that could damage the device’s surfaces. o Remove individual shelves in order to clean the device o Clean them with the warm water and mild cleaning agent. Dry the cleaned surfaces afterwards.
7. Possible Malfunctions In case of malfunction, disconnect the device from its power source. Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation. Malfunction Cause Solution ...
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 33154 Salzkotten phone: +49 (0) 5258 971-0 Germany...
Need help?
Do you have a question about the 300L and is the answer not in the manual?
Questions and answers