SCE ARK36 Installation Instructions

Padlock Door Handle With Large Door Rod Kit

OPTIONAL ROD KITS

"SCE-ARK36" LARGE DOOR ROD KIT FOR 2 OR 3
POINT LATCHING
"SCE-ARK39" LARGE DOOR ROD KIT FOR 2 OR 3
POINT LATCHING
DOOR INTERIOR VIEW
INSERT STOP PIN HERE
HANDLE TURNS COUNTER CLOCKWISE

INSTALLATION INSTRUCTIONS FOR SCE DOOR HARDWARE

ON ENCLOSURES THAT DO NOT HAVE HANDLES, OR
PROVISIONS FOR HANDLES.
1. LOCATE AND DRILL HANDLE AND ROD GUIDE
MOUNTING HOLES.
2. INSTALL ROD GUIDES
3. MEASURE DOOR OPENING HEIGHT.

DOOR ROD CUT LENGTH =
(DOOR OPENING HEIGHT/2) - 2.50"

DOOR ROD ASSEMBLY LENGTH =
(DOOR OPENING HEIGHT/2) + 2.33"
4. INSTALL DOOR HANDLE AND LATCH PLATE.
5. INSERT DOOR ROD THROUGH THE ROD GUIDE BEFORE
ASSEMBLING THE RAMP SHOES.
6. INSTALL RAMP SHOES TO THE DOOR RODS AND INSERT
THE 10-32 SET SCREW. THEN ATTACH DOOR RODS TO
THE LATCH PLATE.
CUTOUT DETAIL
1
INSERT STOP PIN HERE
HANDLE TURNS CLOCKWISE
PADLOCK-DOOR-HANDLE