Hc3 Rtk Gnss Network Rover With Carlson Survce - Champion HC3 Quick Start Manual

9.2. HC3 RTK GNSS Network Rover with
Carlson SurvCE
Step 1
Connect the HC3 to the internet using either a GSM SIM
Card or a Wi-Fi hot spot. The picture below shows a WiFi
connection to the "eGPSGuest" network. Once you see the
name of the hotspot displayed on the screen, start Carlson
SurvCE and create a job with the correct coordinate system
and geoid separation file before configuring the rover. Next
select the Equip tab and then the GPS Rover button.
26