Litelume Wallpack Large Installation Instructions

Wallpack Large
Installation Instructions
Warning
1. To avoid electric shock, disconnect power at source prior to installation.
2. The installation should be performed by qualified electricians or lighting technicians.
3. Before conducting any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool
down.
4. Do not touch the fixture while it is in service.
5. If there is any problem with the fixture, DO turn off power and DO NOT attempt repair unless you are a qualified technician or
the customer service member.
Installation
1. Loosen screws and remove the front lens set carefully from the back plate.
2. Drill appropriate knockouts (B) for wiring, the fixture supports standard 3 1/4'' and 4''Junction box.
3. Attach the back plate on the wall, use the supplied gaskets for a weather tight seal.
C
www.litelume.com
info@litelume.com
©Lite Lume Corporation 2018
833.LED.LUME
gasket
B
C
Page 1/4 LITELUME™ seeks to deliver the most advanced and efficient LED technology. Due to
technology progression, specifications may change. We reserve the right to update product
Rev Date: 07/16/2018 specifications without notice. Contact LITELUME™ for the most up-to-date data.