Do you have a question about the OPAL and is the answer not in the manual?
Questions and answers
Summary of Contents for 1B OPAL
Page 1
User Manual Side Tank side tank Quick Start Guide Safety Information Use and Care Troubleshooting Limited Warranty Learn more about Opal www.FirstBuild.com Ver. 02/21/2019...
Page 2
QUICK START GUIDE Note: There are two drain tubes located on the back of your Opal Nugget Ice Maker indicated as drain tube A and B in the illustration on page 3. Hand Wash Only: Rinse and hand wash Opal Side Tank with warm water and a mild dish soap.
Page 3
Tube (B) is not lying flat. If either of the above issues are present, adjust tube (B) to allow the water to flow. 11. Fill Opal Nugget Ice Maker’s reservoir. 12. Plug in Opal Nugget Ice Maker, and begin making ice.
Proper Installation and Location The side tank should be installed flush to the front of the Opal Nugget Ice maker so that it does not block the airflow vents on the Opal Nugget Ice maker. Opal Side Tank needs to sit on the same level surface as your Opal Nugget Ice Maker.
If water does not flow from the Side tank to the Opal Ice Maker: There may be bubbles in the tube connecting the side tank to the opal or it is not lying flat. Try adjusting the tube to allow the water to flow. Once water starts flowing it typically will not need further adjusting.
Need help?
Do you have a question about the OPAL and is the answer not in the manual?
Questions and answers