1. Manuals
  2. Brands
  3. North American Tool Manuals
  4. Water Pump
  5. 6795
  6. Important operating instructions

North American Tool 6795 Important Operating Instructions

6.5 hp water pump
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
6.5 HP WATER PUMP
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept no
liability for damage or
accidents which arise due to
non-observance of these
instructions and the safety
information herein.
SPECIFICATIONS
Engine: 4-stroke, single
cylinder
Max Output: 6.5 HP @ 3600
RPM
Fuel Tank: 1.6 Gal, Unleaded
Discharge Capacity: 264
gal/min
Max PSI: 45 PSI
Continuous Running Time: 2-
3 hours (actual time varies with
load)
Total head: 92 ft
Suction head: 26 ft
Oil type: SAE !0W-30
CAUTION:
FOR YOUR OWN SAFETY
READ INSTRUCTION
MANUAL COMPLETELY AND
CAREFULLY BEFORE
OPERATING. Failure to follow
all instructions as listed
below may result in electrical
shock, fire, and/or serious
personal injury.
feedback@natitools.com
Model: 6795
CARBURETOR
MODIFICATION FOR
HIGH ALTITUDE USE
At a high altitude, the
standard carburetor air-fuel
mixture is too rich.
Performance will decrease
and fuel consumption will
increase. A very right mixture
will also cause damage to the
spark plug and cause hard
starting. Operation at an
altitude that is different from
the range in which this engine
was certified may increase
emissions when used for an
extended period of time.
High altitude performance
can be improved by specific
modifications to the
carburetor. If the engine is
always operated at altitudes
above 5,000 feet (1,500
meters), have a qualified
mechanic perform the
carburetor modification. This
engine will meet emission
standards when operated at a
high altitude with the
modifications for high altitude
use.
8806795
05/14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6795 and is the answer not in the manual?

Questions and answers

Related Manuals for North American Tool 6795

Summary of Contents for North American Tool 6795

  • Page 1 6.5 HP WATER PUMP Model: 6795 CALIFORNIA PROPOSITION 65 accidents which arise due to CARBURETOR non-observance of these MODIFICATION FOR WARNING: You can create dust instructions and the safety when you cut, sand, drill or grind HIGH ALTITUDE USE information herein.

  • Page 2: Safety Instructions

    Even with a carburetor Never permit anyone to operate poisonous carbon monoxide. modification, the engine horse the pump without proper Avoid the inhalation of exhaust power will decrease about 3.5% instructions. gas. Never run the pump in a for each 1,000 foot (300 meter) closed garage or confined area.

  • Page 3: Operation

    carburetor and reduce engine in order to prevent air leakage Priming the Pump performance. and loss of suction. Verify that the hose connector sealing Before starting the engine, 5) Check the fuel level. Starting washer is in good condition. remove the filler cap from the with a full tank will help reduce pump chamber and completely possible operating interruptions...

  • Page 4: Maintenance

    4) Move the throttle lever away Stopping the Engine Keep all sparks, flames and from the SLOW position, about cigarettes away from any fuel 1/3 of the way towards the 1) Move the throttle lever to the related parts. FAST position. SLOW position.

  • Page 5: Oil Recommendations

    Use unleaded gasoline with a OIL LEVEL CHECK completely and then reinstall the rating of 86 or higher. The drain plug, washer and tighten the engine is certified to run on Check the engine oil level when drain plug securely. unleaded gasoline.

  • Page 6: Spark Plug Service

    5) Insert the cleaned and dry or 5) Install the spark plug carefully new foam air filter in the cover by hand to avoid cross threading. replace the plastic grid. 6) After the plug is seated, tighten with a 13/16 inch spark plug 6) Reinstall the air cleaner wrench to compress the sealing assembly.

  • Page 7: Removal From Storage

    STORING THE PUMP water to drain from the pump ENGINE OIL chamber and then reinstall the drain plug. 1) Change the engine oil. CLEANING FUEL 2) Remove the spark plug. 1) If the engine has been running, allow it to cool for at 3) Pour a tablespoon of clean least one half hour before Gasoline oxidizes and...
  • Page 8 North American Tool (NAT) Industries makes every effort to ensure that this product meets high quality and durability standards. NAT warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
  • Page 9 6.5 HP WATER PUMP Model: 6795 feedback@natitools.com 8806795 10/11...

Table of Contents