Before use Accessories Table of contents Safety precautions Important safety notices Important information Suitable discs Disc protection Control and connection Normal connection Front panel Remote control Normal playback Preparation Normal playback Pause Stop playback Rewind and forward Fast forward and rewind Advanced playback V.
WARNING: TO MINIMISE THE RISK OF FIRE AND ELECTRIC SHOCK,DO NOT EXPOSE DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE HOUSING AS IT CONTAINS DANGEROUS VOLTAGE. ONLY SKILLED TECHNICIANS ARE ALLOWED TO CARRY OUT REPAIR AND SERVICE. CAUTION: If the power cord plug is to be replaced, it is important that the replacement is identical to the plug to be replaced, or that the new plug has been recommended by the manufacturer.
WARNING: IT IS IMPORTANT THAT YOU STUDY AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE DEVICE. KEEP THIS MANUAL FOR FUTURE USE. This device was developed and made with a view to providing maximum safety for the user. Incorrect use of the device may cause electric shock or fire.
Page 6
Lightning Unplug the device for additional protection during thunder or when the device is not used for prolonged periods. This will prevent damage to the device from lightning and surges. Penetration of objects and liquid Never push any objects through the openings into the device, as they may touch dangerous voltage points or short circuit parts and cause fire or...
Handling instructions The DVD player's top and back panel may become warm after prolonged use. This is not due to a defect. When the DVD player is not used, remove the disc and turn off the device. If the DVD player is not used for a long period, its function may deteriorate.
SUITABLE DISCS The following discs can be used: DISC’S MARKING CONTENTS DIMENSION No other discs than those mentioned above cannot be used. Non-standard discs cannot be used, not even when marked as above. The quality of a CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, or DVD-RAM depends on the way the CD was recorded.
Disc handling Do not touch the playback side of the disc Do not put paper or tape on the disc Cleaning the discs Finger prints and dust may cause poor sound and picture quality. Wipe the disc with a dry, soft cloth.
Back panel DVD-PL AYER Tange nt D -1 01 23 0V ~ 5 0H z 230V ~50Hz 30 W ITEM NO.: 11069.01 XXXXXXXXXXXXX 1. Main power input 2. 5.1-channel audio output 3. Composite video output 4. S-video output Normal connection Connection to television set through scart cable Connection to television set through A/V cable To video input(yellow)
Page 11
Connection to surround system and TV-set with component outlet VOLUME/TUNING POWER MODE INPUT BALANCE TUNING BAND To audio inputs of the amplifier Connection to amplifier with digital audio input and TV-set VOLUME/TUNING POWER MODE INPUT BALANCE TUNING BAND To COAXIAL To OPTICAL type digital type digital...
Front panel TANGENT D-101 DVD-PLAYER POWER 1. Power 2. DVD tray 3. Open/Close 4. Standby LED 5. Display 6. Play 7. Stop 8. Previous 9. Next FRONT PANEL...
ANGLE AUDIO SUBTITLE ZOOM MODE SLOW STEP PAUSE ENTER D-101 Installation of batteries 1. Remove the cover 2. Insert batteries. Make sure that the terminals correspond to the symbols shown. 3. Replace the cover Note: The batteries must be placed correctly.
Preparation When you wish to watch a DVD film, switch on the TV-set and choose the video input connected to the DVD player. When you wish to listen to the disc from the audio system, switch on the audio system and choose the input connected to the DVD player.
IMPORTANT All descriptions refer to DVDs. Function and display may vary if other types of discs are used. VIDEO MODE The video output can be set to “YCbCr”, “YPbPr”, “S-VIDEO”, or “RGB”. OSD (On Screen Display) Press DISP to switch between “title played”, “title left”, “chapter played”, “chapter left”, and “display off”.
ZOOM Press this button to enlarge the picture. The size of the picture changes every time the button is pressed. NTSC/PAL Choose between PAL, NTSC, and multi through the setup menu. In the multi function, the device will find the right system. ADVANCED PLAYBACK MENU Press this button to see the main menu and make...
Playing JPEG files JPEG files contain picture information which can be encoded by micro computer software and transmitted to the TV screen via a video output interface. This function is useful in many contexts. For example teachers can change pictures to be shown in the classroom to JPG files by means of a digital camera or a scanner which are often used within the IT world and transfer the pictures to CD-R discs.
MP3-disc’s When playing MP3 discs, a navigation menu appears automatically. Choose the desired file folder from the menu by means of UP or DOWN and confirm your selection by pressing ENTER/PLAY. Select the desired file from the file folder by means of UP or DOWN and start playback by pressing ENTER/PLAY. On this page, press SCROLL LEFT to return to the previous menu and PREV or NEXT to scroll one page back or forward.
Because of the many functions in this DVD- player, it is not possible to access all functions via the remote control. So some functions must be accessed by operating systems setup menu. The keys used to navigate in the following explanation is the SETUP-, SCROLL UP-, SCROLL DOWN-, SCROLL LEFT- and SCROLL RIGHT-keys.
1.4 DVD MENU DISC MENU: : Choose the language to be used as a standard for menus for DVDs (if the DVD supports the language in question). Language Video Audio English OSD Menu English Subtitle Audio English DVD Menu English 2 VIDEO SETUP 2.1 TV SHA PE Under TV SHAPE choose among different TV...
3.2 L PCM Ou t Linear PCM setup: : This option sets the audio output format sent using the units coaxial or optical digital audio output. LPCM 48K In the linear PCM setting, “48K” means “the digital audio output maximum sampling rate is 48KHz” Therefore, when the title’s encoding sampling rate is 96KHz, the output will be forced converted to 48KHz.
This troubleshooting guide may help you find a possible cause of and solution to a problem. If there are still problems, please contact the local service centre or distributor. PROBLEMS AND POSSIBLE SOLUTIONS PROBLEM No power supply No picture No sound The disc is not played Does not react to signals from the remote control...
The DVD player is your ticket to a home cinema. Every single technical detail in this technology is better than in any other previous AV equipment. This brand new digital technology compresses the A/V effect from the cinema down on a disc with a diameter of 12 cm, i.e. the size of a CD. Particularly by means of Dolby Digital and DTS, it is possible to achieve excellent digital surround sound.
Parental control This device allows parental control if the DVD has a specific certification. This function allows you to prevent your children from watching things which you consider inappropriate for them. Refer to the DVD certification and the accompanying information to find out if it carries a certification.
System and output VF Signal NTSC/PAL system CD: 20Hz-20KHz(EIAJ) Frequence DVD: 20Hz-22KHz(48KHz)(Sample result) 20Hz-44KHZ(96KHz)(Sample result) response > 90 dB Audio S/N ratio Video/Picture MPEG1; MPEG2 MPEG1, MPEG2, PCM, DOLBY DIGITAL, ANALOG STEREO Audio Audio output Electric level output: 1.85Vp-p Electric level output: 1Vp-p Video output General data 220V-240V~ 50Hz...
This device includes copyright protected technology covered by various American patents and other intellectual property rights owned by Macrovision Corporation and others. Use of this copyright protected technology is only allowed after prior approval from Macrovision Corporation, and the device is only to be used for the showing of films in private homes and other limited areas, unless otherwise approved by Macrovision Corporation.
Need help?
Do you have a question about the D-101 and is the answer not in the manual?
Questions and answers