Troubleshooting - LG DV6T9H Owner's Manual

5

Troubleshooting

22 Troubleshooting
Troubleshooting
Symptom
No power
The unit does not
start playback.
The remote
control does not
work properly.
Poor picture
quality and sound
distortion
No picture
5
No sound
DV6T9H-SE.AESPLLK.indd 22
Cause
The power cord is disconnected.
An unplayable disc is inserted.
The rating level is set.
The remote control is not pointed
at the remote sensor on the unit.
The remote control is too far from
the unit.
Fingerprints and dust are stained
on the disc.
The TV is not set to receive the
signal from the unit.
The video cable is not connected
securely
The TV does not accept the
resolution that is set on the unit.
The equipment connected with
the audio cable is not set to
receive the signal from the unit.
The AUDIO options are set to the
wrong position.
Solution
Plug the power cord.
Insert a playable disc. (Check the disc type and
regional code.)
Change the rating level.
Point the remote control at the remote sensor
of the unit.
Operate the remote control closer to the unit.
Wipe the disc from the center to out with
a clean cloth. Do not use strong solvents
(alcohol, benzine, thinner, commercially
available cleaners)
Select the appropriate video input mode on
the TV.
Connect the video cable securely.
It can be changed using the resolution of
SETUP menu.
Select the correct input mode of the audio
amplifier.
Set the AUDIO settings to the correct position.
2011-08-30 5:03:31