BGS technic 8557 Manual
BGS technic 8557 Manual

BGS technic 8557 Manual

Leak detector for air condition

Advertisement

Quick Links

Leak Detector for Air Condition

GENERAL

The electronic leak detector simplifies leak detection on cars, trucks, and suitable for other air
conditioning systems and is suitable for refrigerant: R134a, R12, R11, R500, R503, R22, R123, R124,
R502, R404a, R125, AZ 50, HP62, MP39 is adjustable in sensitivity and has a visual and audible
signal upon detection of a leak.

TECHNICAL DATA

 adjustable sensitivity
 battery life: 30 hours under normal condition
 working temperature: 0°C ~ 52°C
 working mode: Continuous and no limit
 short reaction time
 resetting time: 2 seconds
 warm-up time: about 6 seconds
 size: 22.9 x 6.5 x 6.5 cm
 weight: 560 grams
 power supply: 3V DV (2x 1,5V)
 probe length: 35.5 cm

SAFETY

 Read the instructions before using, carefully and keep them in a safe place.
 Always wear safety glasses and safety gloves when working on an air conditioner.
 Do not loosen connections as long as the climate system is pressurized.
 Work on air conditioning systems may be only performed by trained persons.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Art. 8557

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8557 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BGS technic 8557

  • Page 1 Art. 8557 Leak Detector for Air Condition GENERAL The electronic leak detector simplifies leak detection on cars, trucks, and suitable for other air conditioning systems and is suitable for refrigerant: R134a, R12, R11, R500, R503, R22, R123, R124, R502, R404a, R125, AZ 50, HP62, MP39 is adjustable in sensitivity and has a visual and audible signal upon detection of a leak.
  • Page 2 INSTRUMENT 1. Sensor 2. Buzzer 3. LED Battery Indicator 4. Indicator Concentration 5. Mute 6. Higher Sensitivity 7. Reset 8. Lower Sensitivity 9. ON / OFF 10. Battery Check 11. Battery BATTERY Note: please properly fix the battery according to the picture above. Battery Voltage Indication The leftmost LED is the indicator for the two-color voltage.
  • Page 3 AUTOMATIC CIRCUIT/RESET FEATURE This item features an Automatic circuit and a Reset function key that set the unit to ignore ambient concentrations of refrigerant.  Automatic circuit: Upon initial power on, the unit automatically set itself to ignore the level of refrigerant present at the tip.
  • Page 4 RECOMMENDED PROCEDURE Note: On Automotive A/C Systems leak test with the engine not in operation.  The air conditioning or refrigeration system should be charged with sufficient refrigerant to have a gauge pressure of at least 340 kpa (50 psi) when not in operation. t temperatures below 15"C (59"F), leaks may not be measurable, since this pressure may not be reached.

Table of Contents