Section 3: Placing And Receiving Calls; Placing A Call - Samsung Jitterbug How-To Manual

800201_HTG_031308.qxp:user guide

Placing a call

Dialing manually:
You can dial a number directly from any screen on your
phone with 2 easy steps:
1. Dial the full ten digit number using your keypad.
You are not required to dial one (1) first before
placing a long distance call.
2. Press the button when you see "Call?" at the
bottom of your screen.
If you make a mistake while entering the number,
press the button to back up and delete your
entry.
A dial tone means service is available. If service
is not available you'll see "No Service" on
the screen.
Always dial the full ten digit number including
area code even if it's a local call (except 911).
You are not required to dial one (1) first
before placing a long distance call.
30 Placing and Receiving Calls
All manuals and user guides at all-guides.com
3/13/08 1:05 PM Page 30
Placing a call via the Jitterbug
A live Jitterbug operator can connect you to anyone on
your Phone List or to any number in the U.S. or
Canada.
1. Press the "0" button.
2. Press the button when you see "Call?" at the
bottom of the screen. "Calling" will appear on the
screen.
3. When the operator answers, "Connected to" will
appear on the screen.
4. Tell the operator the name of the person in your
Phone List you want to call, or tell them the ten
digit number you want to be connected to.
You can end any call or exit any screen by
closing, then re-opening your phone.
Placing and Receiving Calls
®
operator:
31