IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference: • Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply. •...
Page 3
• Do not leave the appliance unattended whilst connected to the mains supply. • Always use this appliance on a solid, level, non-flammable surface. • Do not use this appliance outdoors. • It is imperative to unplug the power cord after the appliance has been used, before it is cleaned and whilst being repaired.
Page 4
Never place this appliance on an electric, gas, or any • other type of hob. WARNING: Do not open the lid while the water is • boiling. Never fill the kettle more than its capacity, if the kettle is overfilled, boiling water may be ejected – ensure the water level is between the min and max marks.
Page 5
Voltage Selection Your kettle can function at two voltages (120V AC and 230V AC) and the correct voltage for your region MUST be selected using the switch found on the base of the kettle, otherwise serious damage may be caused to the kettle which would not be covered by any warranty or guarantee Instructions for use •...
Page 6
clean any part of the kettle with harsh or abrasive cleaners. • Do not submerge any part of the base, mains cable or kettle in water or any other liquids. Decalcification of your kettle • The frequency of the decalcification depends on the hardness of the water in your area and how often the appliance is used •...
Page 7
• After replacing or changing a fuse on a moulded plug, the cover must be refitted to the plug; the appliance must not be used without a fuse cover. Technical Data Voltage 120/230V ~ 50/60Hz Rated power 1000W Capacity 0.5 Litres Model Number SDA1196...
Need help?
Do you have a question about the SDA1196 and is the answer not in the manual?
Questions and answers