Subscribe to Our Youtube Channel
Summary of Contents for Aqua Free AS DataLog
- Page 1 Operating and installation instructions AS DataLog Table of Contents Page Safety information Assembly and commissioning General instructions Product description Technical data Scope of supply Handling Troubleshooting LED status signal Manufacturer...
- Page 2 Please store these instructions along The old device must be disposed of correctly in accordance with the “AS DataLog” recorder in the storage case. with Directive 2012/19/EU (WEEE). Please also follow the correct operating and safety Product description information for the FLUSH 2.0 system.
- Page 3 7.1 Installation: L: 92 mm; W: 68 mm; Dimensions: H: 30 mmh ■ The “AS DataLog” recording system is used in combi- Measurement Interval: 30 seconds nation with the FLUSH 2.0 system. This requires converting the flushing system as follows: ±1 °C after 3 minutes...
- Page 4 “Software” folder. The “AS DataLog” Troubleshooting system is connected to It is possible that the “AS DataLog” system may not start a PC; no measurements correctly or is not recognised as a Windows drive. In this are being recorded. As case, it is necessary to reset the system.
- Page 5 Manufacturer Aqua free Solutions Ltd. The Media Centre, 7 Northumberland Street Huddersfield, HD1 1RL, Great Britain E-mail: info@aqua-free.co.uk Phone: +44 (0)1484 483045 Headquarters: Aqua free GmbH Winsbergring 31 22525 Hamburg, Germany E-mail: info@aqua-free.com Phone: +49 (0)40 46899990 Fax: +49 (0)40 46899999...
Need help?
Do you have a question about the AS DataLog and is the answer not in the manual?
Questions and answers