Download  Print this page

Cisco SNS-3400 Series Maintenance Manual

Hide thumbs
   

Advertisement

Maintaining the CSACS-1121, Cisco
SNS-3400 Series, and Cisco SNS-3500
series Appliances
The CSACS-1121, Cisco SNS-3415, and Cisco SNS-3495 Series appliances are configured to order and is ready for
installation when it leaves the factory. After you install and configure your appliance, you may have to perform specific
maintenance procedures and operations to ensure that the appliance is operating properly.
These preventive procedures will maintain your appliance in good operating condition and minimize the need for costly,
time-consuming service procedures.
Caution:
To help prevent problems, before performing any procedures in this chapter, review
page 7
and the
Safety Guidelines, page 1
The following sections discuss various environmental factors that can adversely affect appliance performance and
longevity. This section includes:

Maintaining the CSACS-1121 Series Appliance

Maintaining Your Site Environment
Good preventive maintenance includes regular visual inspections of the appliance, including exterior cleaning and
inspection.
This chapter contains:
Cooling, page 2
Temperature, page 3
Humidity, page 3
Altitude, page 4
Magnetism, page 4
sections.
Cisco Systems, Inc.
www.cisco.com
1
Safety Warnings,

Advertisement

Table of Contents

   Summary of Contents for Cisco SNS-3400 Series

  • Page 1: Table Of Contents

    SNS-3400 Series, and Cisco SNS-3500 series Appliances The CSACS-1121, Cisco SNS-3415, and Cisco SNS-3495 Series appliances are configured to order and is ready for installation when it leaves the factory. After you install and configure your appliance, you may have to perform specific maintenance procedures and operations to ensure that the appliance is operating properly.
  • Page 2: General Exterior Cleaning And Inspection

    Maintaining the CSACS-1121, Cisco SNS-3400 Series, and Cisco SNS-3500 series Appliances Maintaining the CSACS-1121 Series Appliance General Exterior Cleaning and Inspection This section details the cleaning requirements for exterior surfaces of the appliance. It also provides information on inspecting cables and adapter cards.
  • Page 3: Temperature

    Maintaining the CSACS-1121, Cisco SNS-3400 Series, and Cisco SNS-3500 series Appliances Maintaining the CSACS-1121 Series Appliance Temperature Temperature extremes can cause a variety of problems, including premature aging and failure of integrated circuits (ICs) or mechanical failure of devices. Extreme temperature fluctuations can cause ICs to become loose in their sockets, causing expansion and contraction of disk drive platters, resulting in read or write data errors.
  • Page 4: Altitude

    Maintaining the CSACS-1121, Cisco SNS-3400 Series, and Cisco SNS-3500 series Appliances Maintaining the CSACS-1121 Series Appliance Altitude Operating an appliance at high altitudes (low atmospheric pressure) reduces the efficiency of forced and convection cooling which can result in electrical problems related to arcing and corona effects. This condition can also cause sealed components with internal pressure, such as electrolytic capacitors, to fail or perform at reduced efficiency.
  • Page 5: Maintaining Cisco The Sns-3415/3495 Appliance

    Safety Warnings, page 7 and the Safety Guidelines, page 1 sections. To maintain the Cisco SNS-3415 or Cisco SNS-3495 appliance, see Maintaining the Server Chapter in the Cisco UCS C220 M3 Server Installation and Service Guide. Maintaining Cisco the SNS-3515/3595 Appliance...
  • Page 6 Maintaining the CSACS-1121, Cisco SNS-3400 Series, and Cisco SNS-3500 series Appliances Maintaining Cisco the SNS-3515/3595 Appliance...

This manual is also suitable for:

Csacs-1121Sns-3500 series

Comments to this Manuals

Symbols: 0
Latest comments: