Advertisement
Page:1 of 4
SB-H Series LED High Bay light Installation Instructions
General Safety Information
• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other
hazards read all warnings and instructions.
• Read all instructions and warnings before installing, servicing, or performing routine maintenance on this equipment.
• Installation and electrical connections should only be performed by a qualified electrician and should be done following local electrical
codes.
• DO NOT INSTALL DAMAGED PRODUCT!
WARNING: Risk of Electrical shock
• Turn off electrical power at breaker box, Lock/out-Tag/out breaker supplying power to fixtures prior to any work being performed.
• Confirm voltage of supplying breaker is same as fixture, see label on fixture.
• Prior to working on fixture or wiring, test with multimeter to confirm power is turned off.
• Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code
requirements.
WARNING: General
• Ensure the luminaries is switched off & suitably cooled down before carrying out any maintenance work.
• MIN 90 ° C SUPPLY CONDUCTORS
• SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 40 ° C (200W/500W: 35° C)
• SUITABLE FOR WET LOCATIONS
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATIONS CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED
CAUTION: Risk of Injury
• Make sure fixture is installed using proper hardware and secured tightly. Follow installation instructions. Do not alter fixture in anyway.
• Wear gloves and safety glasses at all times when removing luminaire from carton, installing, servicing or performing maintenance.
• Avoid direct eye exposure to the light source while on.
CAUTION: Risk of Fire
• Keep combustible and other materials away from fixture and wiring.
No.82 Center Village, Mission Hills Songyuanxia, Guanlan Town,
Longhua District, Shenzhen, Guangdong Province, China 518110
E:
sales@snowball-co.com
W:
www.snowball-co.com
Advertisement
Table of Contents
Summary of Contents for Snowball SB-H Series
- Page 1 Page:1 of 4 SB-H Series LED High Bay light Installation Instructions General Safety Information • To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions.
- Page 2 Page:2 of 4 SB-H Series LED High Bay light Installation Instructions Installation: Suspended This fixture can be mounted suspended or direct to mounting surface. Read page 1 of this instruction guide before proceeding. 1. Install customer supplied mounting hardware such as chain, airline cable or hook. Make sure mounting hardware meets or exceeds requirements.
- Page 3 Page:3 of 4 SB-H Series LED High Bay light Installation Instructions Installation: Direct Surface Mount This fixture can be mounted suspended or direct to mounting surface. Read page one of this instruction guide before proceeding. 1. Mount the fixtures adjustable bracket to a solid surface capable of supporting the fixture. Use customer supplied hardware that meets or exceeds requirements.
- Page 4 Page:4 of 4 SB-H Series LED High Bay light Installation Instructions No.82 Center Village, Mission Hills Songyuanxia, Guanlan Town, Longhua District, Shenzhen, Guangdong Province, China 518110 sales@snowball-co.com www.snowball-co.com...
Need help?
Do you have a question about the SB-H Series and is the answer not in the manual?
Questions and answers