• Socket ∅ 60 mm, 42 mm deep • Frame (for element 55 x 55 mm), suitable for the switching programme used in the building KNX TH-UP Indoor Sensor • Date of issue: 13/01/2010 • Technical changes reserved. Errors reserved.
Drift: ± 0.5% R. H. per year in normal air The following standards have been considered for the evaluation of the product in terms of electro magnetic compatibility: KNX TH-UP Indoor Sensor • Date of issue: 13/01/2010 • Technical changes reserved. Errors reserved.
Elsner Elektronik does not assume any liability for changes in standards after publication of this instruction manual. KNX TH-UP Indoor Sensor • Date of issue: 13/01/2010 • Technical changes reserved. Errors reserved.
Installation position The KNX TH-UP will be installed concealed within a socket (∅ 60 mm, 42 mm deep) and fitted with a frame from the switching programme used in the building. In selecting an installation location, please take care that no direct sunlight, heating element or draught from windows or doors will distort the values measured.
Connect the bus line +/- (black-red plug) to the terminals provided on the sensor board of KNX TH-UP. Pin the sensor with the notches on to the metal frame, so that sensor and frame are fixed. Notes on installation Sensor must not be exposed to water (rain) or dust.