Download Print this page

Facility Explorer FX Series Installation Instructions

Fx supervisory controllers modem card

Advertisement

Quick Links

FX Supervisory Controllers Modem Card
Application
The modem option card (Figure 1) provides 56 Kbps
auto-dial/auto-answer modem communications
capability to the FX Supervisory Controllers.
Figure 1: FX Supervisory Controllers Modem Card
For the FX20/FX60 Supervisory Controllers, the
modem option card must be installed in Option Slot 1;
and when installed, the modem card disables the
onboard RS-232 port on FX20/FX60 Supervisory
Controllers. For the FX70 Supervisory Controllers, the
modem option card must be installed in Option Slot 1
or Option Slot 2; and when installed, it does not
disable the onboard RS-232 port. FX22/FX62
Supervisory Controllers only have one option card slot;
and when installed, the modem option card disables
the onboard RS-232 port. The modem option card is
not supported in any FX Supervisory Controller
already fitted with a GPRS modem card.
For related information on FX Supervisory Controllers
mounting and wiring, refer to the FX Supervisory
Controllers Installation Instructions
(Part No. 24-10174-77).
© 2014 Johnson Controls, Inc.
Part No. 24-10174-26, Rev. B
Installation Instructions
Installation Instructions
North American Emissions Compliance
United States
This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when this
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference, in which case the
user will be required to correct the interference at
his/her own expense.
Canada
This Class (A) digital apparatus meets all the
requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte
toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Installation
Parts Included
Unpack the modem option card and inspect the
contents of the package for damaged or missing
components. If damaged, notify the appropriate carrier
and return any damaged components for repair or
replacement.
Issue Date April 9, 2014
www.johnsoncontrols.com
1

Advertisement

loading

Summary of Contents for Facility Explorer FX Series

  • Page 1 Installation Instructions Issue Date April 9, 2014 FX Supervisory Controllers Modem Card Installation Instructions Application North American Emissions Compliance The modem option card (Figure 1) provides 56 Kbps United States auto-dial/auto-answer modem communications This equipment has been tested and found to capability to the FX Supervisory Controllers.
  • Page 2 Included in this package are the following items: Remove the FX Supervisory Controller cover (FX20/FX60/FX70) or covers (FX22/FX62). For  one modem option card and connector end plate the FX20/FX60/FX70, press in the four tabs on  both ends of the cover and lift off. For the FX Supervisory Controllers Modem Card FX22/FX62, first remove the right cover, then the Installation Instructions (Part No.
  • Page 3 Figure 3: Removing Battery Assembly 11. Replace the FX Supervisory Controller cover or covers. If accessory modules were unplugged, For the FX20/FX60/FX70 controller, remove the plug them back into the FX Supervisory Controller Option Slot blanking end plate. Retain the as before, and secure (Error! Reference source blanking end plate in case you need to remove not found.).
  • Page 4 Wiring Repair Information Connect a standard RJ-11 telephone cable to the If the modem option card fails to operate within its connector on the modem card, and the other end to a specifications, replace the unit. For a replacement working Public Switched Telephone Network (PSTN) option card, contact the nearest Johnson Controls®...

This manual is also suitable for:

Fx20Fx60Fx22Fx62Fx70