Advertisement
Installation Instructions
TOOLS / HARDWARE / PARTS
Hardware required,
not included:
(4) 10-32 x 3/4" header
point Phillips screws
(1) 4" cable tie
ASSEMBLY AND INSTALLATION
NOTE:
The NALRBW rack service lights are designed for use
with 19" wide equipment racks. See the specific
installation instructions provided with the rack for
additional installation information.
1.
Attach the NALRBW (A) within the rack, using four 10-32 x 3/4"
header point Phillips screws (not included). (See Figure 1)
x 4
1
(NE1F2023 rack shown with NALRBW)
Figure 1
2.
Plug the appropriate adapter (C, D, or E) into the DC power
supply (B).
3.
Plug power supply into back of NALRBW (A). (See Figure 2)
4.
Secure power supply plug using a cable tie (not included)
through the cable tie mount. (See Figure 2)
[NALRBW]
B (1)
[DC power supply]
(A)
5.
6.
7.
A (1)
C (1)
[EU Adapter]
Cable tie
4
mount
(A)
(rear view)
Figure 2
Plug the power supply (B) into an available outlet.
Turn on light with power supply cord switch.
Complete the installation following the rack installation
instructions.
NALRBW
D (1)
[GB Adapter]
E (1)
[AU Adapter]
3
3
Advertisement
