Related Manuals for Lathem Airtime AT-MSX
Summary of Contents for Lathem Airtime AT-MSX
- Page 1 All manuals and user guides at all-guides.com Wireless Sync Device Model AT-MSX Installation & User’s Guide...
- Page 2 The information within this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Lathem Time Corp. reserves the right to make changes to any products herein to improve reliability, function, or design.
- Page 3 LED will flash every second to indicate normal operation. The unit will transmit the Lathem RS485 digital signal once per minute, to provide time synchronization to other Lathem devices. It also closes...
- Page 4 All manuals and user guides at all-guides.com Installation & User’s Guide Install Steps Important: Before installing the AT-MSX, verify that an AirTime Transceiver is installed and properly transmitting. You should manually initiate the transmission of the AirTime signal by pressing the TRANS button on the front of your transceiver. 1.
- Page 5 All manuals and user guides at all-guides.com Installation & User’s Guide 2. Pull and disconnect the removable terminal block and connect the remote devices in the RS485 or Dry Sync connecters. (IMPORTANT: RS485 requires proper polarity + to +, - to -.) Once the connections are secure, reconnect the removable terminal block.
- Page 6 All manuals and user guides at all-guides.com Installation & User’s Guide Wiring Diagram An AT-MSX correcting a Lathem RS485 device and/or a dry contact device. Specifications Power: 6VDC/ 300 mA wall-mount power supply. UL approved Frequency 452 MHz Channels 1x10 = 10...
- Page 7 Lathem. 5. If it becomes necessary to send the product or any defective part to Lathem or any authorized service dealer, the product must be shipped in its original carton or equivalent, fully insured with shipping charges prepaid.