TacT Audio M2150 Owner's Manual page 11

Trigger outputs
AC mains input
Speaker output
(normal operation)
The M/S 2150 has a trigger "IN" and "OUT" to provide on and standby control
from a trigger device and to pass the trigger signal to another device.
Connect the M/S 2150 to the AC mains wall socket.
CAUTION: Use the supplied IEC mains cable, or a 3-prong grounded cable only.
The 2150 amplifier has one pair of high quality WBT speaker terminals. These termi-
nals will accept both spade- and banana-plugs. When connecting your speakers,
please make sure that the RED/HOT terminal is connected to your speakers' POSI-
TIVE terminal and the BLACK/COLD terminal is connected to your speakers' NEGA-
TIVE terminal.
RIGHT
SPEAKER
+ -
M/S 2150 Connections
Trigger Connectors
Digital Output
LEFT
SPEAKER
+
Tact Audio
-
11