Related Manuals for Baby Love AURA LX7070 Series
Summary of Contents for Baby Love AURA LX7070 Series
- Page 1 KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE AURA HI LO HIGHCHAIR INSTRUCTION BOOK Series LX7070 www.babylove.com.au...
- Page 2 WARNINGS ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS HIGHCHAIR. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. WARNING: THE CHILD SHOULD BE SECURED IN THE HIGHCHAIR AT ALL TIMES BY THE HARNESS, EITHER IN THE RECLINING OR UPRIGHT POSITION.
- Page 3 WARNINGS WARNINGS: • Never carry the highchair with the child in it. • Do not use the highchair without the tray and always ensure the tray is secure on the arm rests. The tray is not designed to hold the child in the chair. •...
-
Page 4: Parts List
PARTS LIST 1 x U-shaped base frame 1 x Leg Tube Set with rear castors attached 1 x Seat Assembly 1 x Main Tray Assembly with footrest www.babylove.com.au... - Page 5 PARTS LIST 1 x Removable Tray www.babylove.com.au...
- Page 6 1. TO ASSEMBLE THE HIGHCHAIR Remove all parts from the box and layout on a flat surface. Align the U-shaped base frame tubes with the plastic mouldings on the leg tube set. Insert the base frame tubes into the plastic mouldings of the leg tube set.
- Page 7 1. TO ASSEMBLE THE HIGHCHAIR To install the seat assembly, align the adaptors on both sides of the seat assembly with the receivers on the legs. Lower the seat assembly until it engages into the receivers on both legs of the highchair. Ensure the seat assembly is securely connected by pulling upwards.
-
Page 8: To Apply The Brakes
2. TO APPLY THE BRAKES WARNING: ALWAYS APPLY THE BRAKES EXCEPT WHEN MOVING THE HIGHCHAIR. Press the brake lever down on the wheel assemblies to lock the brakes. Push the brake lever up on the wheel assemblies to unlock the brakes. Please Note: The brakes should always be applied to the rear wheels when a child is seated in the highchair and the wheels should only be unlocked when moving the highchair. - Page 9 3. TO SECURE YOUR CHILD IN THE HARNESS WARNING: USE THE HARNESS AT ALL TIMES. A five point harness is provided to restrain your child. To secure your child in the harness please follow the steps below carefully. Push buckle (A) and (B) into the buckle housing (C) until the buckle prongs snap into position.
- Page 10 3. TO SECURE YOUR CHILD IN THE HARNESS The highchair seat has 2 harness slots at different heights to accommodate the child. The shoulder straps must be positioned near the child’s shoulders. To change the shoulder harness height, unclip the shoulder harness straps from the waist harness straps and push the shoulder harness tongue out of the current harness slot and through the back of the seat pad and then pull the shoulder harness buckle...
- Page 11 4. TO ATTACH AND USE THE TRAY WARNING: THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE HIGHCHAIR. THE CHILD IS TO BE SECURED BY THE SAFETY HARNESS AT ALL TIMES WHILE IN THE HIGHCHAIR. CAUTION: Ensure the child’s hands are free from moving parts when the tray is being attached or removed to avoid pinching or entrapment.
- Page 12 4. TO ATTACH AND USE THE TRAY There are two tray positions. To adjust the tray, press and hold the latches under the tray and pull it towards you or push the tray in. www.babylove.com.au...
- Page 13 4. TO ATTACH AND USE THE TRAY The main tray features a removable second tray for convenient cleaning. To use the second tray, place the tray on top of the main tray ensuring the small rib openings on both sides of the second tray lock onto the small ribs on both sides of the main tray.
- Page 14 4. TO ATTACH AND USE THE TRAY www.babylove.com.au...
-
Page 15: Important Note
5. TO ADJUST THE FOOT REST IMPORTANT NOTE: IF FOOT REST IS NOT VISIBLE, IT MAY HAVE BEEN FOLDED UNDERNEATH THE SEAT ASSEMBLY DURING PACKAGING. TO UNFOLD THE FOOT REST FROM UNDERNEATH THE SEAT ASSEMBLY: 1. Remove the seat assembly from the frame. (See Page 19) 2. - Page 16 6. TO ADJUST THE HEIGHT OF THE HIGHCHAIR WARNING: DO NOT ADJUST WITH THE CHILD IN THE CHAIR. IMPORTANT NOTE: ALWAYS REMOVE YOUR CHILD FROM THE HIGH CHAIR BEFORE ADJUSTING THE HEIGHT OF THE HIGH CHAIR. Remove the child and tray from the highchair. Press in and hold each latch on each side of the plastic receivers and lower the chair down or raise to the desired height and then release the latches.
- Page 17 7. TO RECLINE THE SEAT WARNING: DO NOT ADJUST WITH THE CHILD IN THE CHAIR. IMPORTANT NOTE: ALWAYS REMOVE YOUR CHILD FROM THE HIGH CHAIR BEFORE RECLINING THE SEAT ASSEMBLY. There are three recline positions. Lift and hold the recline latch located on the back of the seat.
- Page 18 7. TO RECLINE THE SEAT Tilt the seat back to the desired position. To raise the seat lift and hold the recline latch and raise to the desired position. www.babylove.com.au www.babylove.com.au www.babylove.com.au...
- Page 19 8. TO REMOVE THE SEAT ASSEMBLY IMPORTANT NOTE: ALWAYS REMOVE YOUR CHILD FROM THE HIGH CHAIR BEFORE REMOVING THE SEAT ASSEMBLY. To remove the seat assembly, press in and hold the latches on both receivers to release the adaptors and lift the seat assembly away from the high chair.
- Page 20 9. TO USE THE HIGH CHAIR • Place the highchair on a horizontal, flat and even floor ensuring all wheels are in contact with the floor. • The highchair must not be placed on a table or similar surface to elevate the child.
-
Page 21: Care And Maintenance
CARE AND MAINTENANCE • To prolong the life of your high chair keep it clean and do not leave it in the direct sunlight for extended periods of time. • Removable fabric covers and trims may be cleaned using warm water with household soap or mild detergent. - Page 22 Customer Service Ph: 1300 131 477 Email: info@babylove.com.au Distributed by: Nursery Elegance Pty. Ltd. ACN: 122 443 387 6 Thorpe Street, Sunshine, Victoria, 3020, Australia Due to our continuing program of development, Nursery Elegance reserves the right to alter the specifications, colour or design without any further notice.