Table of Contents
Advertisement
12.
Lift vehicle only at manufacturer-rec-
ommended locations.
13.
Inspect before every use; do not use
if parts loose or damaged.
14.
Keep your work area clean and well
lit. Cluttered work areas invite acci-
dents.
15.
Keep bystanders, children, and
visitors away while operating jack.
Distractions can cause you to lose
control.
16.
Stay alert. Watch what you are do-
ing, and use common sense when
operating a jack. Do not use a jack
while tired or under the influence of
drugs, alcohol, or medication. A mo-
ment of inattention while operating
jacks may result in serious personal
injury.
17.
Store idle jacks out of reach of chil-
dren and other untrained persons.
Jacks are dangerous in the hands of
untrained users.
18.
Jack service must be performed only
by qualified repair personnel. Service
or maintenance performed by unqual-
ified personnel could result in a risk of
injury.
19.
When servicing a jack, use only iden-
tical replacement parts - refer to at-
tached, product-specific parts list and
diagram. Follow instructions in the
"Inspection, Maintenance, And Clean-
ing" section of this manual. Use of
unauthorized parts or failure to follow
maintenance instructions may create
a risk of injury and may void any ap-
plicable warranty.
20.
Maintain labels and nameplates on
the Jack. These carry important
Page 3
For technical questions, please call 1-800-444-3353.
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
21.
Before use, read manufacturer's
instruction manual for the vehicle (or
object) you will lift.
22.
When lifting only one wheel, support
the load immediately with one jack
stand (not included) placed under the
side of the vehicle being lifted. Align
the saddle of the jack stand directly
under the vehicle's seam or recom-
mended lifting point.
23.
When lifting the entire front end
or rear end of a vehicle, support
the load immediately with two jack
stands. Align the saddles of the jack
stands directly under the vehicle's
frame or recommended lifting points.
Also, adjust the jack stands to the
same height.
24.
Do not work under the vehicle without
properly supporting the vehicle with
jack stands.
25.
Avoid dangerous oncoming traffic.
Use the Jack as far away from the
roadside as possible.
26.
Industrial applications must follow
OSHA requirements.
27.
Do not allow anyone in the vehicle
while using the Jack. Keep all by-
standers a safe distance away from
the vehicle.
28.
Do not support both ends of the ve-
hicle at the same time.
29.
Before lowering the Jack, remove all
tools and equipment from under the
vehicle.
Floor Jacks
Hide quick links:
Advertisement
Table of Contents
