Table of Contents
Advertisement
43.
MUTE Button
[TV/VCR P.15]
Mutes the sound. Hit it again to restore sound.
44.
SLEEP Button
[TV/VCR P.16]
Sets the Sleep Timer.
45.
ANT(ENNA). Jack
Connect to an antenna, cable system or satellite
system.
NOTE:
•
We do not recommend the use of universal remote controls. Not all of the functions may be controlled with
a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.
1)Open the battery compartment cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
[P.12]
INSTALLING THE BATTERIES
46.
Power cord
[P.15]
Connect to a standard AC outlet (120V/60Hz).
NOTE:
•
Remove the power cord from the hook to
avoid breaking a wire before you connect to a
standard AC outlet.
47.
AUDIO OUT COAXIAL Jack
Connect to the digital input of an external
amplifier or decoder (for DVD Audio only).
[BATTERY PRECAUTIONS]
•
Be sure to follow the correct polarity as indicated
in the battery compartment. Reversed batteries
may cause damage to the device.
•
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
•
If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
•
Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
- 11 -
[P.13]
EN
Advertisement
Table of Contents
