Subscribe to Our Youtube Channel
Related Manuals for Mytrex myActive Alert
Summary of Contents for Mytrex myActive Alert
- Page 1 Alert User Instructions Version 1.0d June 4, 2015 Mytrex, Inc. 10321 Beckstead Lane South Jordan, UT 84095...
- Page 2 To send a HELP ALERT signal to the PERS, press and release the HELP button on the face of the myActive Alert. The signal for help is transmitted as soon as the button is pressed and will continue to transmit for an additional two seconds after releasing the HELP button.
- Page 3 (fall detection disabled) in this mode which greatly extends the battery life. However, pressing the HELP button on the face of the myActive Alert will cause a HELP ALERT signal to be transmitted. The signal is transmitted for approximately two seconds after the button is released and the LED flashes slowly.
-
Page 4: Specifications
Specifications Dimension: 2.165” x 1.468” x 0.603” RF Transmission Frequency: 418 MHz Operating Temperature: -10ºC to 60ºC Battery Type: CR2450 Lithium Battery Life: 1 year or more (2 years in Basic non-supervised mode) Battery Voltage: 3.0V ... - Page 5 This product contains a lithium battery. Lithium batteries can explode, leak, catch fire or cause burns if not handled appropriately. Do not disassemble, puncture or crush battery. Avoid exposure to water, fire or high temperatures. Properly dispose of the myActive Alert. P a g e...
-
Page 6: Getting Started
GETTING STARTED 1. Press the HELP button on the face of the myActive Alert 7 times within three seconds. 2. Learn the myActive Alert into the desired Personal Help Button bank of the MXD or MXD3G (PERS). 3. Place the MXD or MXD3G into Range Test mode and press the HELP button on the face of the myActive Alert.
Need help?
Do you have a question about the myActive Alert and is the answer not in the manual?
Questions and answers