Page 1
Blade Change Instructions Maintenance Instructions This is a detailed instruction guide specific to Champion Rescue Tools Guillotine Cutter – please see separate information provided for general hydraulic tool usage, warranty information, MSDS information, etc. when every second counts...
Page 2
Champion Rescue Tools – RC-5 Guillotine Cutter Detailed Tool Instructions Introduction General Operating and Safety Instructions please refer Thank you for purchasing the RC-5 Guillotine Cutter – a to the “General Operating Procedures” Booklet tool designed for cutting in areas where significant furnished with your tool.
Page 3
Champion Rescue Tools – RC-5 Guillotine Cutter Detailed Tool Instructions Using the RC-5 as a Guillotine Cutter and Crimper encountered materials before putting the tool into Always use proper safety gear and follow all safety field service. instructions as outlined in the manual.
Champion Rescue Tools – RC-5 Guillotine Cutter Detailed Tool Instructions Blade Changing Instructions 1. Extend blade approximately 2 – 2.5 inches or until 10. With the Allen wrench, screw cap head screws cap head screws are exposed. through the blade and into the threaded part of the 2.
Page 5
Champion Rescue Tools – RC-5 Guillotine Cutter Detailed Tool Instructions Support Should you require either technical, service, training, or any other type of support, please contact our Corporate Offices at: Champion Rescue Tools 814 Berry Court Upland, California 91786 USA...