When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks
of this unit.
Then use [CHANNEL K K / L L ] until "AUX" appears on the screen.
VIDEO
AUDIO
VIDEO
AUDIO
(IN)
Video cable (commercially available)
To the Video output jack
WATCHING A TV PROGRAM
1
Plug in the power cord
After antenna or cable connection is com-
pleted, connect the power cord into a stan-
dard AC outlet.
NOTE:
•
If any digits appear in the corner of the
screen, press [POWER] without unplug-
ging the power cord.
2
Turn on the unit
Press [POWER] to turn on the unit.
3
Select the channel number
Use [CHANNEL K K / L L ] or the Number buttons to
select your desired channel number.
Note for using the Number buttons:
¡
You must precede single-digit channel numbers
with a zero (for example: 02, 03, 04 and so on).
¡
When selecting cable channels which are higher
than 99, press [+100] first, then enter the last two
digits. (Example: to select channel 125, first press
[+100] then press [2] and [5].)
EN
USING FRONT A/V INPUT JACKS
POWER
VOLUME
CHANNEL
STOP/EJECT
REW
Audio cable
(IN)
(commercially available)
To the Audio output jack
TV OPERATION AND SETTINGS
PLAY
F.FWD
REC/OTR
EARPHONE
(OUT)
(OUT)
4
Adjust sound
Use [VOLUME X X /Y Y ] to adjust the
volume.
Press [MUTE] to instantly mute
the sound.
Press it again to restore the previous sound level.
TO WATCH CABLE OR SATELLITE
CHANNEL
•
If the unit is connected to a cable box or satellite
box, use [CHANNEL K K / L L ] to select CH3 or CH4
according to the output channel setting of the
device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
•
When an external equipment is connected to the
front AUDIO/VIDEO input jacks, use
[CHANNEL K K / L L ] repeatedly until "AUX"
appears on the screen.
- 10 -
[Front of the unit]
ex.
VCR or video camera, etc.
VOLUME
C C C C C
AUX
20
C C C C C C C