Parts And Operation - Nesco RG-1400 User Manual

Base
Before using the appliance, READ AND SAVE ALL INSTRUCTIONS. Wipe down
the appliance with a soft damp cloth and make sure there is no metal or foreign
objects on the temperature control. Wipe dry with soft cloth. NOTE: During first use,
the appliance may give off a slight odor. This is normal and the potential odor will
burn off quickly.
1. Place base on a flat, heat resistant, stable surface in a well ventilated area.
2. Select ribbed grill side or smooth griddle side. Set cooking plate into base.
3. Make sure the temperature controller is in OFF position. Insert control into inlet
on cooking plate handle. Then insert plug into electrical outlet.
4. Adjust controller to desired setting. NOTE: The signal light on controller
indicates heat setting. When desired setting is reached, the light will turn off.
It will continue to cycle on and off during use to indicate heat setting is being
automatically maintained.
5. Allow preheat 7-10 minutes. Place food directly onto cooking plate and cook to desired doneness.
6. When finished cooking, turn controller to off and remove plug from power
outlet.IMPORTANT: To avoid injury wait until the appliance has cooled before
removing the temperature controller.
CAUTION:
• Hot oil and liquid may splash as grease and juices hit drip tray.
• ALWAYS USE CARE WHILE USING THIS APPLIANCE!
• DO NOT TOUCH! any hot surfaces while cooking. The grill or griddle may
become hot while cooking and will remain hot after use and during cool down.
• DO NOT overload the grill surface.
• DO NOT remove the temperature probe until the dial is turned to OFF, the cord
unplugged and appliance is completely cooled.
• DO NOT move the appliance while in use.
Parts
Handles
Cooking Plate
Grill or Griddle
Before first use
Operation
2
Temperature
Controller