Table of Contents
Advertisement
Switching the Trimmer Heads
1. Ensure that the trimmer is turned off before switching the heads.
2. With the trimmer head in the locked position hold the handle of the
trimmer and turn the trimmer head anti-clockwise until the line on
the top section lines up with the beginning of the arrow. (Fig.1)
3. Lift the trimmer head from the handle.
4. To replace the trimmer head align the line on the top section with
the beginning of the arrow . Push the trimmer onto the handle. Turn
in a clockwise direction until the line is aligned with the spot on the
handle.
Note: make sure the motor spindle is in the actuator arm after
reassembling the head (Fig. 3)
Fig. 3
Using the Trimmer
• Switch the trimmer ON.
• Move the trimmer upwards and outwards through the hair you wish to
remove. The wide trimmer is ideal for tidying sideburns and small
areas of facial hair.
• The wide trimmer head is ideal for shaping and styling the neckline
and sideburns or making small touch ups to any facial hair to add the
finishing touches, for a professional looking cut.
Note: never submerse unit handle into water.
Motor spindle in actuator arm
Advertisement
Table of Contents
